Previous topicNext topic

Help > ArtisanRV_xx.4.1.0 Other Utilities > Place Spot Dim >

ArtisanRV

Standard Workflow - Place Spot Dims

Purpose

Use Place Spot Dimensions to automatically place spot level annotations on terrain, floors, topography, grading surfaces, and other landscape elements within the Revit model. Spot Dimensions provide clear elevation information for design coordination, grading verification, construction documentation, and quality assurance.

This workflow helps ensure that critical levels are accurately communicated throughout the project documentation set.

Prerequisites

Before placing Spot Dimensions:

  1. The relevant terrain, floor, or topographic elements have been created.
  2. Project levels and coordinate systems have been verified.
  3. Appropriate Spot Dimension styles are available within the project.
  4. Site grading and elevation design have been reviewed.
  5. Views intended for annotation are configured correctly.

Outcome: The project is ready for elevation annotation.

1. Review the Areas Requiring Annotation

  1. Open the project model.
  2. Identify areas where elevation information is required.
  3. Typical locations include:
    • Finished ground levels
    • Topographic surfaces
    • Floor surfaces
    • Hardscape areas
    • Planting areas
    • Grading transitions
    • Key construction interfaces
  4. Confirm documentation requirements.

Outcome: Elevation annotation locations are identified.

2. Prepare the View

  1. Open the appropriate plan, section, or 3D view.
  2. Verify that:
    • Relevant elements are visible.
    • Annotation categories are enabled.
    • Required detail levels are active.
  3. Confirm the view scale is suitable for annotation placement.

Outcome: The view is prepared for Spot Dimension placement.

3. Launch the Place Spot Dimension Tool

  1. Open the Spot Dimension tool.
  2. Select the appropriate Spot Dimension style.
  3. Review placement options before proceeding.

Outcome: The Spot Dimension tool is ready for use.

4. Select Target Elements

  1. Choose the surfaces or elements to be annotated.
  2. Typical targets include:
    • Terrain surfaces
    • Topographic surfaces
    • Floors
    • Graded areas
    • Hardscape elements
  3. Verify the selected geometry contains valid elevation data.

Outcome: Target elements have been selected for annotation.

5. Place Spot Dimensions

  1. Place Spot Dimensions at key locations including:
    • High points
    • Low points
    • Level transitions
    • Feature corners
    • Drainage points
    • Critical design interfaces
  2. Review each placed annotation.
  3. Confirm elevation values display correctly.

Outcome: Elevation data is displayed throughout the design.

6. Review Annotation Placement

  1. Examine annotation spacing and readability.
  2. Check for:
    • Overlapping text
    • Duplicate dimensions
    • Missing critical levels
    • Cluttered drawing areas
  3. Reposition annotations where necessary.

Outcome: Spot Dimensions remain clear and legible.

7. Verify Elevation Accuracy

  1. Compare Spot Dimension values against:
    • Design levels
    • Grading information
    • Survey data
    • Construction requirements
  2. Investigate any unexpected elevation values.
  3. Correct model geometry if necessary.
  4. Regenerate dimensions following any significant design changes.

Outcome: Annotated elevations accurately reflect model geometry.

8. Coordinate with Grading and Terrain Design

  1. Review Spot Dimensions alongside:
    • Terrain Models
    • Proposed Topography
    • Floor Elements
    • Drainage Features
    • Hardscape Elements
  2. Confirm grading relationships are clearly represented.
  3. Verify accessibility and drainage requirements are maintained.

Outcome: Elevation data supports grading and site coordination activities.

9. Update Project Documentation

  1. Add Spot Dimensions to:
    • Grading Plans
    • Setting Out Drawings
    • Landscape Plans
    • Hardscape Plans
    • Site Coordination Drawings
  2. Review sheet layouts.
  3. Confirm annotation consistency throughout the documentation set.

Outcome: Elevation information is incorporated into project drawings.

10. Final Quality Review

  1. Perform a documentation review.
  2. Verify:
    • Critical elevations are annotated.
    • Annotation styles are consistent.
    • Spot Dimensions remain legible at plotted scale.
    • Levels align with design intent.
  3. Resolve any remaining issues before publication.

Outcome: Project drawings contain accurate and coordinated elevation information.

Verification Checklist

  • ✅ Target surfaces have been identified.
  • ✅ Views have been prepared correctly.
  • ✅ Spot Dimensions have been placed successfully.
  • ✅ Elevation values have been verified.
  • ✅ Annotation readability has been reviewed.
  • ✅ Grading coordination has been completed.
  • ✅ Documentation has been updated.
  • ✅ Quality assurance review has been completed.

Recommended Next Step

Following the Place Spot Dimensions workflow, review the annotated levels alongside Terrain Models, Topography Conversions, Floor Elements, Drainage Design, Hardscape Layouts, and Planting Areas to ensure all finished levels remain coordinated and ready for detailed design, construction documentation, and site setting-out activities.