Command: CSA_DRAW_ARC3POINTS
Purpose
Construct Arc By 3 Points using Artisan Drawing settings.
Usage
1. Click Draw Arc By 3 Points
|
|
Click the Draw Arc By 3 Points button on the Drawing Ribbon |
2. Click on 3 points
 |
Click on the start point of the arc, a point anywhere along the edge and also the end point of the arc. Operation is somewhat similiar to the CAD System's Arc 3 Points command. |
Notes
The layer, colour, weight, linetype and linetype scale will be those currently set in the Artisan Drawing Ribbon. These may be different from the CAD system's current settings.
Links